Page 13 - index.html
P. 13

The Outpaw PetIdent 160 is a reading device for RFID microchips &
   RFID ear tags. It is equipped with an OLED screen to display the
   detected chip number. The Outpaw PetIdent 160 can read all kinds of
   FDX-B and ID64 RFID tags, with stable, safe and reliable performance.
   Using the Outpaw PetIdent 160
                          Press the function button to
                          turn on the device.
                          Press the button again to go
                          into scan mode.
                          Screen the pet or animal
                          with the device. In pets, the
                Function Button  microchip is typically located
                          between the shoulder blades.
                          Be aware that in sporadic
                          cases, the chip could also
                          have moved or implanted into
            Charging Port  a different location.
      A beep tone indicates the positive detection of a microchip. The
      detected chip number will be displayed on the screen. In case the
      device is connected to, e.g., a PC using the provided USB cable
      while reading, the chip number will also be transmitted to your
      computer. Therefore, e.g., a text file must be opened to record the
      chip number.
      To turn off the reader, then press the button and hold for 3 seconds.
      Alternatively, the device will turn off itself after 180 seconds.



                                           13
   8   9   10   11   12   13   14   15   16   17   18